50th Year In Business | We offer Irrigation , maintenance and design for residential, commercial and industrial clients.

Know When to Repair Water Pumps!

Regular water supply is very important to complete all chores on time. When the water pump breaks down, it becomes very difficult to go on with the daily routine. You need to be aware of the signs of water pump breakdown and get it repaired so that you don’t face much trouble.

The main symptoms of breakage

The most important and first symptom of a pump breakdown is a decrease in the power of the water pressure. At the same time, the noise level starts to rise, strong vibrations occur, and energy consumption increases. If the water pumps are not repaired in time, the device will completely fail, which will lead to increased costs.

Other symptoms also indicate disruption of work:

  • Leakage in pumping system;
  • Equipment twitches during operation;
  • The device does not turn on at all;
  • Not enough water is supplied;
  • The pump does not turn off and continues to pump water;
  • Sudden pressure drops;
  • Strong vibrations.

In any case, it is necessary to hire the Orlando irrigation water pump repair immediately.

Why do breakdowns occur?

There are several main reasons for pumping equipment failure:

  • limescale;
  • mechanical damage;
  • lack of lubrication;
  • operation of equipment at maximum power;
  • idling of the pumping station;
  • overheating and voltage drops in the power grid.

Well pump repair

Removing a stuck water screw pump is a complex, labor-intensive job that requires lifting equipment and machinery. You need to raise it if you need to repair or clean the well.

It is not recommended to dismantle it on your own as this can lead to injury or accidents in the well. We guarantee you good results and careful handling of the equipment. Specialists will carry out a full diagnosis, draw up a plan, and promptly dismantle the equipment. The whole work will not take more than two hours.

Why do you need to contact us?

  • Employees of the company are officially employed and have work experience;
  • We will come, pick up the equipment for repair, and return it in good condition;
  • Educational documents confirm the qualifications of our engineers;
  • We use the best modern equipment to repair the pump in the well;
  • We will be able to pull out equipment stuck in the well, regardless of size;
  • Engineers complete the work on time;
  • We provide a warranty for work within one year;

Proper operation of the water pump will last a long time. Avoid dry running, high temperatures, and freezing, improper water power. Timely contacting the irrigation sprinkler pump repair in Orlando will help prevent bigger problems.

Lawn Mowing – Why is It So Important?

A neat lawn with bright green succulent grass is a natural decoration of the plot. The grass seems to be an absolutely unpretentious crop, but in practice, it still requires maintenance. With the Orlando replacement irrigation system controller, lawn mowing becomes easy and effective.

Mowing seems like a simple task, but in practice, you need to follow a number of rules so as not to be left with a dry area overgrown with weeds.

Well, no doubt that the most attractive lawn is well-groomed. It is in this lies the main function of the garden, which is the enhancement of the land. Of all the lawn care work, the most important is mowing the lawn. Don’t forget about the Orlando irrigation control valve replacement.

What is Mowing?

Mowing is the most critical step in lawn care. Daily mowing will make the lawn luxuriant, soft, and dense and avoid many problems. There will be no place for weeds on such a lawn, and bald spots will never appear.

Why is lawn mowing so important?

Mowing grass helps preserve nutrients in the soil. Mowing the grass helps fight weed and stimulates the appearance of new shoots, affecting the density of grass cover.

Most of us certainly dread cutting the grass, but mowing is an essential step in garden care. Daily mowing your lawn can help to encourage the long-term well-being of your grass, appearing in more resilient turf later on.

Of course, a freshly mowed lawn looks beautiful. The beautiful look of a neat lawn is completely worth the effort!

  • Enhance the Health of Your Lawn
  • Strong and Maintainable Turfs
  • Overcome Allergies and Discomfort

How often and when do you need to mow the lawn?

It depends on the region you live in. The last mowing of the lawn is usually carried out three to four weeks before frost, but only if the grass grows noticeably.

In the period of active growth, which occurs in the summer months, it is advisable to mow the grass twice a week. And in the spring, during dry periods in summer and autumn, you can mow the lawn about once a week.

But these are only recommendations. In each specific case, you need to decide when to mow the lawn. If the height of the grass has increased by one and a half centimeters, then you can safely start a lawnmower.

If you cannot mow the lawn in time, you need to cut the grass in two steps. First, it is necessary to shorten its ends, and only then, after a few days, to slant it at the desired height.

Warning Signs of A Failing Irrigation Control System

Although a lawn irrigation system can run efficiently for years, it may require finding irrigation valves for maintenance or replacement, valve parts, or wiring. Orlando irrigation wire and valve locator can do the job.

If you have a lovely garden, the possibilities are you have installed an auto irrigation system. The latest automatic irrigation systems have replaced traditional hose irrigation methods. With an Orlando replacement irrigation control, you don’t have to water your garden by hand or drag a hose and sprayer around your yard. The automatic watering system irrigates the garden evenly over some time.

Watering is required to have a healthy and flourishing garden. But if your irrigation system is damaged, it can create many problems such as dry areas, plant diseases, and wasted water. A leaking or malfunctioning automatic irrigation system affects the health and appearance of plants and leads to an increase in water costs. In the worst case, if a leak occurs near the foundation of a building, it can also damage the structure. Hence, it is essential to find and repair leaks as soon as possible. But how can you tell if your system is damaged?

It is essential to understand the system to identify signs of damaged underground yard and landscape irrigation systems. An underground irrigation system is not as complex as you might think. The field sprinkler system consists of plumbing, valve box, controller, and electrical valves. Valves and plumbing run throughout your lawn and landscape. If any part is damaged, you will probably notice some visible signs. By knowing warning signs, you can save money on repairs and avoid potential trouble.

Check out some general warning signs that indicate your irrigation system is damaged and in need of repair.

Sprinkler nozzles

Sometimes water sprinklers start to spray inappropriately. This may be due to a valve or pressure problem. However, as a rule, the problem is simply cracked or clogged nozzles. So, when you see irregular spraying, check the sprinkler heads. Cracked or broken nozzles need to be replaced, and clogged nozzles need to be cleaned.

Flooded or scorched areas

Automatic irrigation systems water your grass or lawn evenly. But when you see that an area in your backyard is flooded or dry, it indicates a problem. So, take a look at your whole lawn for any dry or damp area. Your garden needs balanced watering to thrive. If you find soaked grass or patches of yellow grass, you need to restore efficient water distribution.

Clogged valves

Another common sign of damage is constantly leaking or dripping valves. To give the right amount of water to the yard area, the system relies on operating valves. Signs such as droplets, leaks, or wet areas around pressure regulators and filters indicate something is wrong. This problem can arise from broken or loose parts in another area of ​​your irrigation system. It is also possible that dust or small particles have accumulated in the equipment. Whatever the cause, be sure to fix these problems before they cause costly damage in the future.

Pressure problems

When the water pressure gets too low or too high, it can cause watering problems.If the water pressure is extremely high, it can cause premature wear on your system hardware. And when the pressure is extremely low, your grass and plants won’t get the water they need.

Have you seen any of the warnings listed above? Then you are probably in need of expert Orlando replacement irrigation control services. Our Custom Irrigation Inc. can visit your property and analyze for faults before making the necessary fixes to keep your backyard looking beautiful!

Common Sprinkler Timer Problems and How to Resolve Them?

Lawn sprinkler timers are integral parts of irrigation systems. They work responsibly as the brains of the irrigation system. They make you aware of the valves or zones and let you know whether or not you have to turn them on. You also have clear insights about how long you have to run them.

Over time, sprinkler timers can experience issues. The problems can be regarding the circuit board, transformer or many other things. We have included some common issues in this article and ways to solve them. If you think you can’t fix the problems on your own and are looking for lawn sprinkler timer repair in Orlando, kindly reach us at customirrigation.us. Moreover, let’s find out how to help you fix the common issues without an expert.

Watering at odd times

Some sprinklers come with 9-volt batteries, while others come with AA batteries. Also, many water sprinklers run through a wall adapter, meaning they won’t have power in an electrical outage. Due to this, the sprinkler timer stops working, and it loses the pre-set information like date and time. If you observe sprinklers are unable to turn on when they should, they might have some issues. To fix such problems, you have to set a timer to turn on the sprinkler for a particular period and see if it is working.

Some zones are separated from irrigation

What do you think when you find some unwatered area of the lawn? Some people believe that the area has been separated from being watered because of valve or water line leakage issues. But it is not the right cause. The problem starts with the sprinkler timer.

So, to deal with this problem, head to the timer and check all watering zones separately. If you find all zones are working correctly, go and ensure timing.

Sprinklers turn on or off right away

If sprinklers in your lawn turn on or off frequently, you may need to look at the timing system. When checking the timing system, kindly ensure that you have correctly configured the duration settings. If you cannot troubleshoot the issue and need a head-to-head sprinkler repair in Orlando,call us at 407.647.0658.

Conclusion These are some common problems you can experience on your sprinkler timer and methods to solve them. Moreover, if you need professional help for your lawn sprinkler timer repair in Orlando,visit our website or call us.

Water sprinkler head replacement- Take a step towards saving water, labor, and time

If you are not a fan of manual irrigation and prolonged pulling of hoses around the garden or summer cottage, a sprinkler will be the best option to save time and water. Using Orlando water sprinkler head replacement is the easiest and most inexpensive way to preserve green spaces and irrigate them with sufficient moisture on time.

For example, if you are the owner of a large-scale land plot to provide high-quality irrigation to all areas and zones, you will need several good sprinklers. And the rate of water supply, in turn, will be determined by the type of soil.

Sprinklers water: types and features of the application

Sprinkler water sprinkler is an irrigation head. There are several types of such nozzles:

Rotary: It is required for irrigation of areas with an irrigation radius from half a meter to 25 m. Irrigation is carried out using a progressively rotating jet. This is one of the most popular types among landscape designers, as it allows high-quality irrigation of even the most difficult terrain areas.

The main advantage of such a nozzle is that its body is hidden underground and extends above the surface at the water supply time (by 30 cm). This allows you to hide the sprinkler nozzles in an inoperative state, thereby focusing on the territory’s landscape, not on the irrigation device.

In addition, rotary sprinklers, unlike other types, do not interfere with mowing grass. Such functional sprinklers are in great demand and are actively used for watering lawns in public places, in summer cottages and backyards, in sports facilities.

Pulse: It is also a type of rotary irrigation head that has a circular or adjustable irrigation sector. According to the standard, the installation of sprinklers of this type is carried out using a special plastic or metal extension. Most often, they are used on slopes, as well as in large areas.

The principle of operation of such a sprinkler is based on the fact that water is ejected from the nozzle at an angle in the form of a jet. At this moment, the upper part of the sprinkler head rotates and hits the splitter; then, the jet is converted into many smaller jets that fall in the form of arcs on the irrigation zone. In addition, it is possible to change the irrigation radius. Thus, high-quality irrigation is ensured with low water consumption.

Serrated (static): They are hidden under the ground and extend when the system starts operating. Their difference is that they are motionless; therefore, they can be used only in small areas or irrigation of individual zones since they provide irrigation of only a small radius – a site up to 5m. It is worth considering that the nozzle of such a sprinkler can be different: constant or variable. At the same time, the jet emitted by this device is somewhat similar to an umbrella. The installation of fan-type irrigators is most often carried out in a checkerboard pattern.

Another type of sprinkler is rotators, which are based on a special multi-jet rotor with the dimensions of a fan sprinkler nozzle. This arrangement works well with a static sprayer instead of a standard nozzle, and you can get a highly functional sprinkler with extremely low water consumption. Thanks to the numerous rotating jets, water is consumed much more slowly and evenly.

 

Benefits of installing Orlando irrigation sprinkler head replacement:

  • Adapts well to areas of complex configuration, terrain slopes;
  • Suitable for all types of soil, except for heavy clay;
  • More even distribution of water relative to flood irrigation;
  • The possibility of applying soluble fertilizers;
  • Limits soil disturbance reduces the risk of soil erosion;
  • Providing additional protection of plants from freezing at low temperatures;
  • Simplicity and mobility of the design;
  • The possibility of dismantling at the end of irrigation;
  • Phased commissioning due to limited funding for the construction of the system;
  • Do not require high qualifications of service personnel;
  • Multipurpose use (fertilization, pumping of liquids);
  • The possibility of early watering;
  • A favorable microclimate that promotes plant growth (the optimal level of air and soil humidity contributes to obtaining high yields);
  • High mobility when moving irrigation equipment from one field to another;
  • Long service life.

Considering all this, it is worth thinking about installing an Orlando irrigation sprinkler head replacement, which allows you to significantly reduce the amount in receipts for water and ensure high-quality irrigation of all types of crops and trees on your site.